SikaWall 1015 Adhesive Base Coat

£0.00

Spray Applied Adhesive Coat. A high polymer base coat suitable for use on external wall insulation systems & painted surfaces. SikaWall 1015 is the premium adhesive coat for all high performance SikaWall renders.

  • Spray Base Coat

  • Coverage approx. 5sqm/ea@3mm thick

  • Available in 25kg Bags

  • Available for Collection or Delivery

———————————————————————————

CONTACT US - For orders and pricing

Quantity:

Spray Applied Adhesive Coat. A high polymer base coat suitable for use on external wall insulation systems & painted surfaces. SikaWall 1015 is the premium adhesive coat for all high performance SikaWall renders.

  • Spray Base Coat

  • Coverage approx. 5sqm/ea@3mm thick

  • Available in 25kg Bags

  • Available for Collection or Delivery

———————————————————————————

CONTACT US - For orders and pricing

Spray Applied Adhesive Coat. A high polymer base coat suitable for use on external wall insulation systems & painted surfaces. SikaWall 1015 is the premium adhesive coat for all high performance SikaWall renders.

  • Spray Base Coat

  • Coverage approx. 5sqm/ea@3mm thick

  • Available in 25kg Bags

  • Available for Collection or Delivery

———————————————————————————

CONTACT US - For orders and pricing

  • Shelf Life: 12 Months from date of manufacture

    Storage Conditions: Dry frost free conditions

    Colour: Grey

  • Suitable Substrates: Graphite EPS, Phenolic, Mineral Wool

    Unsuitable Substrates: Masonry Substrates, Uneven & Problematic Substrates

    Consumption: When applied to a correctly prepared even substrate at a thickness of 3 mm (Recommended Thickness) a 25 kg bag approximately covers 5 m2

    Mixing: Mixed with 5.5 litres of clean potable water no other material should be added.

    Mixed by a concrete mixer or paddle mixer.

    Mix for approximately five minutes.

    Care should be taken not to over mix or over trowel.

    Application:

    • SikaWall®-1015 Adhesive coat must only be applied using a traditional troweling technique.

    • SikaWall®-1015 Adhesive coat has a maximum application thickness of 6 mm.

    • To achieve maximum thickness the adhesive should be applied over 2 passes.

    • First pass of 3 mm applied to the substrate, the fibre glass mesh then embedded whilst Adhesive Coat is still wet.

    • A further 2-3 mm of Adhesive Coat should be applied to a smooth flat finish once first pass has taken up.

  • Product Data Sheet: Download Here

 
SikaWall 100 Surerend Base Coat
£0.00
SikaWall 531 Smoothband
£0.00
Ashton Cream
£0.00
Arctic/Iceberg
£0.00
160gm Alkali Resistant Scrim Cloth
£0.00